ECP Universal 2 Series – Positive Displacement Pump

• CIP capability available. Pump body has optional internal flat body profile andwill free drain with vertical ports. Optional rotor and body hub drilling providedfor difficult CIP cleaning applications.
• Cover is free draining in horizontal or vertical port positions.
• Rotor/shaft connection sealed from product zone.
• Single mechanical seals standard. Optional: double mechanical seals and triple lip seals for reliable performance in chemically aggressive applications or certain COP sanitary applications.
• Seal flush optional: seal areas interconnected to improve circulationand draining of seal flush fluid. Steam-In-Place also is optional.
• Stainless steel bearing frame optional on models 006 to 370.
• Aseptic design (Option)

Long-life Features

• Up to 500 psi (34.5 bar) pressure capability.
• Special rotor nut designed for extended service without loosening.
• No bearings in the product zone.
• Large diameter 17-4 PH shafts for greater strength and stiffness.Helps reduce vibration; extends seal life.
• Heavy duty bearing frame (stainless steel available as an option).
• Double tapered roller bearings.
• Greased lubed bearings for positive lubrication to all bearings over entire speed,temperature and pressure range.
• Body retaining screws for maintaining mechanical seal contact during inspection.
• Extended outer seal life. A wave spring, instead of an O-ring, mechanically loadsthe seal.
• O-Ring on inner seal, seals on clean surface as seal moves due to wear.
• Unique mechanical seal design utilizes 3 pin stationary seal and specialdesign shaft for rotary seal.

• Bevel Seat Available
• Optional European Types; DIN, SMS, RJT
• Male NPT and 150 lb. flanges optional on Models 006 through 220 size.
• 150 lb. flanges standard on Model 320.
• Contact factory for available rectangular flange inlets.

Rotors Standard:  Twin Wing – Standard; suitable for most applications.

• Single Wing – For reduced breakage on fluids with discrete particulates, such as diced tomato products

Rotor clearance Standard:  up to 180°F (82°C)

• Hot clearance rotors option for applications up to 300°F (149°C).
• Other special clearances available

O-Rings Standard:  Buna-N Options:

• PTFE/FFKM
• Fluoroelastomer (FKM)
• Fluoroelastomer (FKM) – Class 6
• EPDM
• EPDM – SF
• EPDM – Class 6
• Silicone
• Perfluoroelastomer (FFKM)
• FEP Encapsulates
• Buna-N – Metal Detectable
• FKM – Metal Detectable
• EPDM – Metal Detectable

Cover & Gearcase Standard: cast iron powder coated gearcase, 17-4 stainless steel shafts, stainless steel bearing retainers Options:

• Stainless steel gearcase
• 316L stainless steel shafts
• Steel-It paint
• Lower shaft position
• Bearing Isolators
• Pedestal shims for side mounted pumps. Left hand shaft position standard.
• Right hand shaft position on side mounted gearcase

Tru-Fit® Close coupled Tru-Fit® pump mounted on stainless steel base with stainless steel adaptors standard. Features:

• No shaft alignment necessary. No coupling guard required.
• Special base design enhances cleanability.
• Reduces overall length of complete unit by an average of 20-25%.
• Average of 20-25 gear ratios available per horsepower.
• Separate oil sump for gear reducer and timing gears.

Options:

• 304 SS polished plate base.
• NEMA or IEC frames available. Right angle reducer also available foradditional space savings.
• 1/2 through 60 horsepower drive options available.
• Horizontal or vertical porting.